1" Male Manifold Blanking Plug: Seals Without PTFE (video guide)
The 1" male manifold blanking plug from MaxHeatUFH seals the end of a manifold bar or any unused 1" female port. It is nickel-plated brass with a washer or O-ring sealing face, so no PTFE is needed.
The 1" male manifold blanking plug from MaxHeatUFH seals the end of a manifold bar or any unused 1" female port. It is nickel-plated brass with a washer or O-ring sealing face, so no PTFE is needed.
Here is how it fits and what to check, with the data sheet and install manual to download below.
Key facts
- 1" BSP male thread
- Nickel-plated brass
- Washer or O-ring sealing face
- No PTFE needed
- Seals a manifold bar end or unused 1" female port
How to fit it
- Check the seal is seated and the port is clean
- Screw the plug in by hand
- Tighten until the seal compresses
- Check for weeps during the pressure test
Buy it
The 1" Male Manifold Blanking Plug is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.
Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.
Watch the video and download the documents
Watch how each part works and how to fit it, and download its data sheet and install manual.
Every data sheet and manual: Product Library · All videos: MaxHeatUFH on YouTube
Design it in MaxHeatUFH ProLoop
Add your rooms, choose screed, overlay, joisted or electric, and get a free quick design and full kit list with prices.
Related videos
90° Elbow Connector Set 1": Pump pack round the corner, no extra pipework (video guide)Manifolds · Video
MTA Terminal Adaptor 16mm x 1/2": compression joint, no press (video guide)Manifolds · Video
Manifold Pressure Gauge End Unit: system pressure at a glance (video guide)Manifolds · Video