Single Room Pump Pack, Valve Only: One room, no manifold (video guide)

A single room pump pack that runs one room straight off a radiator or boiler circuit, with no manifold. The thermostatic valve holds the loop at 35 to 60°C. It comes without a pump, so fit your own 130mm pump with 1½" unions.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• One room, no manifold needed
• Holds 35 to 60°C, within about ±2°C
• Isolation valves and pump terminal box fitted
• No pump: fit a 130mm pump with 1½" unions
• Rated to 10 bar
• ½" UFH tappings, 15mm primaries on isolating valves
• Pre-wired pipe stat: pump on at 42°C, off at 31°C

How to fit it

1. Fit pump with new gaskets, arrow with flow, wire to terminal box
2. Mount level on a wall, never on the floor
3. Connect the loop and primaries
4. Electrician wires it from a 3A fused spur
5. Set the valve after screed drying
6. Pressure test the loop before screeding

Buy it

The Single Room UFH Mixing Pump Pack (Valve Only, No Pump) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.