Pressure / Temperature Gauge: Bar and °C on one dial (video guide)

A replacement combined gauge for MaxHeatUFH pump and blending valve units. One dial shows system pressure in bar and flow temperature in degrees, so you can check the unit at a glance. It has a threaded brass connection.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Replacement combined gauge
• Pressure in bar and flow temperature on one dial
• Suits MaxHeatUFH blending valve and pump packs
• Threaded brass connection
• Other makes: check the old gauge's thread first

How to fit it

1. Isolate, release the pressure and let it cool
2. Unscrew the old gauge
3. Seal the thread, screw in with the dial to the front
4. Refill and repressurise
5. Check for weeps and compare with the boiler gauge
6. Note the cold-fill pressure at handover

Buy it

The Pressure / Temperature Gauge for UFH Mixing Unit is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.