Electric Heating Mat 200W/m²: high output for rooms with more heat loss (video guide)
The MaxHeatUFH 200W/m² electric underfloor heating mat is a high output mat for tile and stone floors in conservatories, bathrooms and rooms with more heat loss, where a 150W mat may struggle. In a regular room it's quicker to lay than loose cable.
The MaxHeatUFH 200W/m² electric underfloor heating mat is a high output mat for tile and stone floors in conservatories, bathrooms and rooms with more heat loss, where a 150W mat may struggle. In a regular room it's quicker to lay than loose cable.
Here is how it fits and what to check, with the data sheet and install manual to download below.
Key facts
- 200W/m² high output
- Tough 4mm twin-core cable, double insulated
- Self-adhesive 0.5m mesh
- 230V supply
- 11 sizes from 1 to 10m²
- BEAB approved, lifetime warranty
How to fit it
- Test the mat, record the readings and plan the layout
- Roll out 50 to 100mm in from the walls
- Cut the mesh, never the cable, to turn
- Run the sensor between two runs, test again, then tile
- Let the adhesive cure about 7 days, then raise 1 to 2°C a day
- No rugs over 2.5 tog on heated areas
Buy it
The MaxHeatUFH Electric Underfloor Heating Mat 200W/m² is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.
Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.
Watch the video and download the documents
Watch how each part works and how to fit it, and download its data sheet and install manual.
Every data sheet and manual: Product Library · All videos: MaxHeatUFH on YouTube
Design it in MaxHeatUFH ProLoop
Add your rooms, choose screed, overlay, joisted or electric, and get a free quick design and full kit list with prices.
