Electric Heating Mat 100W/m²: low output for en-suites and cloakrooms (video guide)
The MaxHeatUFH 100W/m² electric underfloor heating mat is a low output mat for tile and stone floors in well insulated, low heat loss rooms like en-suites and cloakrooms. It gives comfort warmth rather than primary heat, and sits in the tile adhesive bed.
The MaxHeatUFH 100W/m² electric underfloor heating mat is a low output mat for tile and stone floors in well insulated, low heat loss rooms like en-suites and cloakrooms. It gives comfort warmth rather than primary heat, and sits in the tile adhesive bed.
Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.
Key facts
- 100W/m² on 230V
- Twin-core cable on a 0.5m wide self-adhesive mesh
- About 3 to 4mm thick
- One 3m cold tail
- 13 sizes from 1 to 12m²
- Comfort warmth, not primary heat
How to fit it
- Test the mat and plan the layout first. Unrolled mats can't be returned
- Roll out 50 to 100mm in from the walls
- Cut the mesh, never the cable, to turn
- Run the floor sensor between two runs, then tile in flexible adhesive
- Test out of the box, once laid and before tiling
- Floor-sensing thermostat, 30mA RCD, installed to BS 7671
Buy it
The MaxHeatUFH Electric Underfloor Heating Mat 100W/m² is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.
Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.
Watch the video and download the documents
Watch how each part works and how to fit it, and download its data sheet and install manual.
Every data sheet and manual: Product Library · All videos: MaxHeatUFH on YouTube
Design it in MaxHeatUFH ProLoop
Add your rooms, choose screed, overlay, joisted or electric, and get a free quick design and full kit list with prices.
