Loose Heating Cable 10W/m or 20W/m: for rooms where a mat won't fit (video guide)

MaxHeatUFH loose-lay electric underfloor heating cable is a twin-core cable for tile and stone floors. Press it between the studs of our uncoupling membrane and tile straight over. Ideal for awkward, L-shaped or small rooms where a mat won't fit.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• Twin-core cable for tile and stone floors
• 10W/m: close spacing, 5 to 160m
• 20W/m: wider spacing, 10 to 125m, can also go in screed
• 10W/m at 65mm or 20W/m at 130mm gives 150W/m²
• The heating cable can't be cut

How to fit it

1. Bed the uncoupling membrane in flexible tile adhesive
2. Spacing = free floor area ÷ cable length
3. 10W/m under 50mm spacing means the cable is too long
4. Press the cable between the studs
5. Keep both joints bedded in adhesive, then tile

Buy it

The MaxHeatUFH Electric Underfloor Heating Loose Cable, 10W/m or 20W/m is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.