MaxHeatFix Plus Panel 16mm: self-adhesive, snaps together (video guide)

MaxHeatFix Plus is the larger, 16mm pipe version of the MaxHeatFix panel. Peel off the backing film, stick the panels down, snap them together and press the pipe in, ready for a thin flowing screed.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 16mm pipe version of MaxHeatFix
• 1200 x 600mm, pack of 10 covers 7.2m²
• Takes 14 to 17mm pipe
• Spiral or serpentine patterns
• Self-adhesive, snaps together
• Ready for a thin flowing screed

How to fit it

1. Acclimatise the panels in the room for 24 hours
2. Prime the floor and fit edge insulation round every wall
3. Peel and stick each panel so the connectors engage
4. Lay the pipe and connect every loop
5. Pressure test to BS EN 1264, keep under pressure while screeding

Buy it

The MaxHeatFix Plus Panel 1200 x 600mm, 16mm Pipe (Pack of 10) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.