MaxHeatFix Low Profile Panel 12mm: just 15mm high for retrofits (video guide)

MaxHeatFix is a fast-fit panel for 12mm pipe, just 15mm high, so it suits retrofits where floor height is tight. The panels slide and lock together, and built-in clips hold the pipe.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• 15mm high panel
• 600 x 600mm, pack of 10 covers 3.6m²
• Takes 10 to 12mm pipe
• 150mm or 75mm pipe centres
• Slide-and-lock panels with built-in pipe clips

How to fit it

1. Prime the floor and fit a soft edge strip to every wall
2. Screw each panel down and click the next one on
3. Tap the pipe into the clips with a rubber mallet
4. Tile direct, or encapsulate in compound within 72 hours of priming
5. Pressure test to BS EN 1264 first and record the result

Buy it

The MaxHeatFix Low Profile Panel 600 x 600mm, 12mm Pipe (Pack of 10) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.