Heatmiser Sensor Probe: wired remote air or floor sensor (video guide)
A wired remote sensor for Heatmiser thermostats that accept one, such as the Edge, Touch, neoStat V3 and neoStat WiFi. It can measure air or floor temperature and is designed to be used as a floor sensor.
A wired remote sensor for Heatmiser thermostats that accept one, such as the Edge, Touch, neoStat V3 and neoStat WiFi. It can measure air or floor temperature and is designed to be used as a floor sensor.
Here is how it fits and what to check, with the data sheet and install manual to download below.
Key facts
- Wired remote sensor
- Measures air or floor temperature
- Designed for use as a floor sensor
- For the Edge, Touch, neoStat V3 and neoStat WiFi
How to fit it
- Fit the probe inside a conduit so it can be replaced later
- Lay it between the heating cables or loops
- Not on top of them, so it reads the floor, not the cable
Buy it
The Heatmiser Temperature Sensor Probe is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.
Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.
Watch the video and download the documents
Watch how each part works and how to fit it, and download its data sheet and install manual.
Every data sheet and manual: Product Library · All videos: MaxHeatUFH on YouTube
Design it in MaxHeatUFH ProLoop
Add your rooms, choose screed, overlay, joisted or electric, and get a free quick design and full kit list with prices.
