MaxHeatSolo Egg Crate Panel for 12mm Pipe: Peel-and-Stick (video guide)

The MaxHeatSolo castellated egg crate panel from MaxHeatUFH is a 16mm panel for 12mm pipe, with a self-adhesive backing that sticks to a primed subfloor. Filled with fibre-reinforced levelling compound, the total build-up is just 18 to 22mm.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 16mm self-adhesive panel for 12mm pipe, 1000 x 600mm
• 18 to 22mm total build-up
• Up to 135 W/m² at 45°C mean water
• 15 to 25 minute warm-up
• 150mm pipe centres, up to 13m² per loop
• Concrete or chipboard base only, not over insulation or floating floors
• Use a decoupling membrane under tiles

How to fit it

1. Patch any gaps, sweep, vacuum and prime the subfloor
2. Fit the edge strip and tape its skirt down
3. Peel and stick the panels
4. Press the pipe in between the bosses and test
5. Pour the fibre-reinforced levelling compound

Buy it

The MaxHeatSolo Castellated Egg Crate Panel for 12mm Pipe (1000 x 600mm) - Self Adhesive Backing is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.