6mm Cementitious Tile Backer Board 1200 x 600mm: Cement Right Through (video guide)

The 6mm cementitious tile backer board from MaxHeatUFH is cement-based right through, not a coated foam. It gives a solid surface to tile onto over electric underfloor heating, with a thin 6mm build-up.

Here is how it fits and what to check, with the data sheet and install manual to download below.

Key facts

• Cement-based right through
• For tiled floors with electric UFH
• Thin 6mm build-up
• 1200 x 600mm board
• Covers 0.72m² per board
• Divide the floor area by 0.72, round up, add a few for cuts

How to fit it

1. Make sure the subfloor is sound, clean and flat
2. Lay and fix the boards with the joints staggered
3. Tile with a suitable tile adhesive
4. Test the heating mat to its own instructions before and after tiling

Buy it

The 6mm Cementitious Tile Backer Fibre Board 1200 x 600mm is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.