10K Floor Probe for UFH Thermostats (3m): Replace Without Lifting the Floor (video guide)

The 10K floor probe from MaxHeatUFH is a 10K NTC floor temperature sensor with a 3m cable, for underfloor heating thermostats. Fit it as a replacement or add-on so the thermostat can read and limit floor temperature. In a conduit, it can be replaced without lifting the floor.

Watch the full video and the quick version below, and download the data sheet and install manual for the exact specification.

Key facts

• 10K NTC floor sensor
• 3m cable
• Replacement or add-on for UFH thermostats
• Lets the thermostat read and limit the floor temperature
• Sits in a conduit, so it can be replaced without lifting the floor
• Never fit it without a conduit

How to fit it

1. Check the thermostat takes a 10K NTC probe
2. Lay a conduit ending between two cables or loops, not on top
3. Push the probe in and seal the conduit end
4. Connect to the floor sensor terminals
5. Set the floor limit

Buy it

The 10K Floor Probe for UFH Thermostats (3m) is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.