Copper M-Press 15mm Fitting Pack: 160 press fittings in one order (video guide)

The everyday 15mm copper M-press fittings for radiator, hot and cold water runs in one order: 160 fittings, supplied as 15 full bags. No flame and no solder on site.

Here is what is in the pack and how the fittings go on, with the data sheet and install manual to download below.

What is in the pack

• 20 x coupling 15mm
• 30 x elbow 15mm
• 20 x equal tee 15mm
• 20 x fitting reducer 22-15mm
• 10 x elbow i/a 15mm
• 20 x 45 bend 15mm
• 20 x end cap 15mm
• 10 x female tee 15mm x 1/2"
• 10 x female wall plated elbow 15mm x 1/2"

How to fit it

1. Cut the tube square, deburr inside and out and wipe clean
2. Mark the insertion depth
3. Push the fitting on to the mark and press with the 15mm M-profile jaw
4. Check every press, then fill and pressure test

Works with

MaxHeatUFH M-profile press jaws, the Electric Hydraulic Press Tool (MH-EHCS) and the High Power tool (MH-HPEHCS).

Buy it

The Copper M-Press 15mm Fitting Pack is available from MaxHeatUFH. Order by 12pm on a working day for next working day UK delivery. Trade customers see their trade price when logged in.

Planning a whole floor? Design your UFH system yourself in 3 minutes with MaxHeatUFH ProLoop and get an instant quick design and quote.