{"title":"Heat Pump Connection","description":"\u003cp\u003eParts for connecting underfloor heating to a heat pump. Heat pumps run at low flow temperatures, so a non-mixing pump set is usually all you need between the heat pump and the \u003ca href=\"\/collections\/manifolds\"\u003emanifold\u003c\/a\u003e. Order by 12pm for next working day UK delivery.\u003c\/p\u003e","products":[{"product_id":"pre-assembled-heat-pump-circulation-pack","title":"UFH Non-Mixing Pump Set with Grundfos UPM3 Flex (Pre-Assembled)","description":"\u003cp\u003eA pre-assembled non-mixing UFH pump set, also called a heat pump circulation pack, with a Grundfos UPM3 Flex 25-70 A-rated pump. It's for heat pump and other low-temperature systems where no blending valve is needed. It bolts straight onto the manifold, and the PWM-ready pump can take its speed signal from the heat pump.\u003c\/p\u003e\u003ch3\u003eWhy installers use it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMade for heat pumps:\u003c\/b\u003e no blending valve, so nothing holds back a low flow temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePWM-ready Grundfos pump:\u003c\/b\u003e the heat pump can control the pump speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUp to 7m head:\u003c\/b\u003e with constant curve (fixed speed) settings when there's no PWM signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOne of our best sellers:\u003c\/b\u003e pre-assembled and ready to bolt on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing\u003c\/td\u003e\n\u003ctd\u003eNone (no blending valve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eBolts onto the manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump\u003c\/td\u003e\n\u003ctd\u003eGrundfos UPM3 Flex 25-70 130, up to 7m head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump control\u003c\/td\u003e\n\u003ctd\u003ePWM, or pump settings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/heat-pump-connection\"\u003eHeat pump connection\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/auto-balancing-stainless-steel-ufh-manifold\"\u003eAuto-Balancing Stainless Steel UFH Manifold\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-wire-thermal-actuator-230v\"\u003e2-Wire Thermal Actuators 230V\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/grundfos-replacement-pump-power-cable-upm3\"\u003eGrundfos Replacement Pump Power Cable (UPM3)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eWhen should I use a non-mixing set?\u003c\/b\u003e\u003cbr\u003eWhen the heat source already runs at floor temperature, as most heat pumps do. If the boiler runs hotter than the floor needs, choose a \u003ca href=\"\/products\/ufh-manifold-blending-valve-pump-pack-20-55c-with-grundfos-upm3-flex\"\u003eblending valve pump pack\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs it ready to fit?\u003c\/b\u003e\u003cbr\u003eYes. It's supplied pre-assembled and bolts straight onto the manifold.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOrder by 12pm, Monday to Friday, for next working day UK delivery.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eProduct codes: MH-PUMPSET-NONMIX\u003c\/p\u003e","brand":"Grundfos","offers":[{"title":"Default Title","offer_id":59108766744911,"sku":"MH-PUMPSET-NONMIX","price":207.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/4493\/6015\/files\/mh-heat-pump-pack.png?v=1792163069"},{"product_id":"ufh-non-mixing-pump-set-with-wilo-a-rated-6m-pump","title":"UFH Non-Mixing Pump Set with Wilo A-Rated 6m Pump","description":"\u003cp\u003eA non-mixing UFH pump set with a Wilo A-rated 6m-head pump and its power cable. It suits manifolds fed by a heat pump or other low-temperature source, where the flow is already at floor temperature, typically below 50–55°C. It bolts onto the manifold, takes the primary flow and return from the side or bottom, and can be fitted left- or right-hand.\u003c\/p\u003e\u003ch3\u003eWhy installers use it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWilo 6m pump:\u003c\/b\u003e A-rated high-efficiency circulator, cable supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNo blending valve:\u003c\/b\u003e for heat pump and low-temperature systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlexible connections:\u003c\/b\u003e side or bottom primary entry, left or right hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePre-assembled and tested:\u003c\/b\u003e ready to install.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing\u003c\/td\u003e\n\u003ctd\u003eNone (no blending valve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirectly on the UFH manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary entry\u003c\/td\u003e\n\u003ctd\u003eSide or bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHanding\u003c\/td\u003e\n\u003ctd\u003eLeft or right hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax system pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump\u003c\/td\u003e\n\u003ctd\u003eWilo A-rated, 6m head, cable included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/heat-pump-connection\"\u003eHeat pump connection\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/dualmix-stainless-steel-manifold-assembly\"\u003eDualmix Stainless Steel Manifold Assembly\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-wire-thermal-actuator-230v\"\u003e2-Wire Thermal Actuators 230V\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wilo-replacement-pump-power-cable\"\u003eWilo Replacement Pump Power Cable\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eCan it go on either side of the manifold?\u003c\/b\u003e\u003cbr\u003eYes. It's fully reversible for left- or right-hand fitting, with side or bottom primary entry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat pressure is it rated to?\u003c\/b\u003e\u003cbr\u003eUp to 10 bar system pressure.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOrder by 12pm, Monday to Friday, for next working day UK delivery.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eProduct codes: MH-NM-WILO6\u003c\/p\u003e","brand":"Wilo","offers":[{"title":"Default Title","offer_id":59113564504399,"sku":"MH-NM-WILO6","price":215.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/4493\/6015\/files\/mhs-non-mixing-wilo-6m.jpg?v=1792515660"},{"product_id":"ufh-non-mixing-pump-set-no-pump","title":"UFH Non-Mixing Pump Set (No Pump)","description":"\u003cp\u003eThe no-pump version of our non-mixing UFH pump set. It's for manifolds on a heat pump or other low-temperature source, where no blending valve is needed. Fit your own 130mm, 1½in-union circulator, which suits installers who already have a pump or need to match the heat pump maker's choice. It bolts onto the manifold, takes the primary flow and return from the side or bottom, and can be fitted left- or right-hand.\u003c\/p\u003e\u003ch3\u003eWhy installers use it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBring your own pump:\u003c\/b\u003e takes any 130mm pump with 1½in unions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNo blending valve:\u003c\/b\u003e for flow already at floor temperature, typically below 50–55°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlexible fitting:\u003c\/b\u003e side or bottom primary entry, left or right hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eManifold mounted:\u003c\/b\u003e bolts directly to the UFH manifold.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing\u003c\/td\u003e\n\u003ctd\u003eNone (no blending valve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirectly on the UFH manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary entry\u003c\/td\u003e\n\u003ctd\u003eSide or bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHanding\u003c\/td\u003e\n\u003ctd\u003eLeft or right hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax system pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump\u003c\/td\u003e\n\u003ctd\u003eNot included (fit 130mm, 1½in unions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/grundfos-upm3-flex-25-70-circulation-pump\"\u003eGrundfos UPM3 Flex 25-70 Circulation Pump\u003c\/a\u003e for PWM control from the heat pump\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bastion-a-rated-ufh-circulating-pump-inc-cable\"\u003eBastion A-Rated UFH Circulating Pump\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wilo-a-rated-ufh-circulating-pump-6m-head-inc-cable\"\u003eWilo A-Rated UFH Circulating Pump 6m\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/heat-pump-connection\"\u003eHeat pump connection\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eWhich pump should I fit?\u003c\/b\u003e\u003cbr\u003eAny 130mm pump with 1½in unions. If your heat pump has a PWM output, the Grundfos UPM3 Flex can take its speed signal.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need non-mixing or blending?\u003c\/b\u003e\u003cbr\u003eNon-mixing is for heat sources that already run at floor temperature, typically below 50–55°C, such as a heat pump. If your boiler runs hotter, use a \u003ca href=\"\/products\/ufh-manifold-blending-valve-20-55c-valve-only-no-pump\"\u003eblending valve pack\u003c\/a\u003e instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOrder by 12pm, Monday to Friday, for next working day UK delivery.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eProduct codes: MH-NM-NOPUMP\u003c\/p\u003e","brand":"MaxHeatUFH","offers":[{"title":"Default Title","offer_id":59113570271567,"sku":"MH-NM-NOPUMP","price":59.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/4493\/6015\/files\/non-mix-new.png?v=1792163514"},{"product_id":"ufh-non-mixing-pump-set-with-bastion-a-rated-6m-pump","title":"UFH Non-Mixing Pump Set with Bastion A-Rated 6m Pump","description":"\u003cp\u003eA non-mixing UFH pump set with a Bastion A-rated 6m-head pump and its power cable. It's for standard-sized manifolds on a heat pump or other low-temperature source, where no blending valve is needed. It bolts onto the manifold, takes the primary flow and return from the side or bottom, and can be fitted left- or right-hand.\u003c\/p\u003e\u003ch3\u003eWhy installers use it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBastion 6m pump:\u003c\/b\u003e A-rated, power cable included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePWM option:\u003c\/b\u003e add the Bastion PWM signal cable for speed control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNo blending valve:\u003c\/b\u003e for flow that's already at floor temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eReversible:\u003c\/b\u003e left- or right-hand fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing\u003c\/td\u003e\n\u003ctd\u003eNone (no blending valve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirectly on the UFH manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary entry\u003c\/td\u003e\n\u003ctd\u003eSide or bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHanding\u003c\/td\u003e\n\u003ctd\u003eLeft or right hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax system pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump\u003c\/td\u003e\n\u003ctd\u003eBastion A-rated, 6m head, cable included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/heat-pump-connection\"\u003eHeat pump connection\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/auto-balancing-stainless-steel-ufh-manifold\"\u003eAuto-Balancing Stainless Steel UFH Manifold\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/replacement-circulating-pump-cable\"\u003eBastion Replacement Pump Cables\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/ufh-non-mixing-pump-set-with-bastion-a-rated-7-5m-pump\"\u003eNon-Mixing Pump Set with Bastion 7.5m Pump\u003c\/a\u003e for larger systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eDo I need non-mixing or blending?\u003c\/b\u003e\u003cbr\u003eNon-mixing is for heat sources that already run at floor temperature, typically below 50–55°C, such as a heat pump. If your boiler runs hotter, use a \u003ca href=\"\/products\/ufh-manifold-blending-valve-pump-pack-20-55c-with-bastion-a-rated-6m-pump\"\u003eblending valve pump pack\u003c\/a\u003e instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003e6m or 7.5m?\u003c\/b\u003e\u003cbr\u003eThe 6m suits most single-manifold systems. Choose the 7.5m for larger systems or longer loops.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOrder by 12pm, Monday to Friday, for next working day UK delivery.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eProduct codes: MH-NM-BAS6\u003c\/p\u003e","brand":"Bastion","offers":[{"title":"Default Title","offer_id":59113596485967,"sku":"MH-NM-BAS6","price":175.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/4493\/6015\/files\/mhs-non-mixing-bastion-6m.jpg?v=1792515661"},{"product_id":"ufh-non-mixing-pump-set-with-bastion-a-rated-7-5m-pump","title":"UFH Non-Mixing Pump Set with Bastion A-Rated 7.5m Pump","description":"\u003cp\u003eA non-mixing UFH pump set with the higher-head Bastion A-rated 7.5m pump, for larger heat pump systems or longer loops. Use it where the flow is already at floor temperature, typically below 50–55°C, so no blending valve is needed. It bolts onto the manifold, takes the primary flow and return from the side or bottom, and can be fitted left- or right-hand. The pump's power cable is included.\u003c\/p\u003e\u003ch3\u003eWhy installers use it\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e7.5m head:\u003c\/b\u003e for bigger floor areas and longer loops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeat pump ready:\u003c\/b\u003e no blending valve in the way of a low flow temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSide or bottom entry:\u003c\/b\u003e to suit how the primaries arrive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePre-assembled and tested:\u003c\/b\u003e bolts straight on.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing\u003c\/td\u003e\n\u003ctd\u003eNone (no blending valve)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDirectly on the UFH manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary entry\u003c\/td\u003e\n\u003ctd\u003eSide or bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHanding\u003c\/td\u003e\n\u003ctd\u003eLeft or right hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax system pressure\u003c\/td\u003e\n\u003ctd\u003e10 bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePump\u003c\/td\u003e\n\u003ctd\u003eBastion A-rated, 7.5m head, cable included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eWorks with\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/heat-pump-connection\"\u003eHeat pump connection\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/manifolds\"\u003eUFH manifolds\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/2-wire-thermal-actuator-230v\"\u003e2-Wire Thermal Actuators 230V\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/replacement-circulating-pump-cable\"\u003eBastion Replacement Pump Cables\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQuestions\u003c\/h3\u003e\u003cp\u003e\u003cb\u003eWhen do I need the 7.5m pump?\u003c\/b\u003e\u003cbr\u003eOn larger systems or longer loops. \u003ca href=\"\/pages\/contact\"\u003eSend us your plans\u003c\/a\u003e and we'll check the pump against your loop lengths.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan it go on either side of the manifold?\u003c\/b\u003e\u003cbr\u003eYes. It's fully reversible for left- or right-hand fitting, with side or bottom primary entry.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eOrder by 12pm, Monday to Friday, for next working day UK delivery.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eProduct codes: MH-NM-BAS75\u003c\/p\u003e","brand":"Bastion","offers":[{"title":"Default Title","offer_id":59113599992143,"sku":"MH-NM-BAS75","price":181.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/4493\/6015\/files\/mhs-non-mixing-bastion-75m.jpg?v=1792515660"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/4493\/6015\/collections\/mh-heat-pump-pack.jpg?v=1792021100","url":"https:\/\/www.maxheatufh.com\/collections\/heat-pump-connection.oembed","provider":"MaxHeatUFH","version":"1.0","type":"link"}